MagMod Professional Flash Kit, MMPROKIT01

 Transform your on-camera flash into an omni-directional light source with the MagSphere, designed for use with the MagMod flash modifier system. The soft, diffused light is flattering and it has an integrated gel slot for adjusting the color of your flash. The two neodymium rare-earth magnets allow it to quickly attach to a separately available MagGrip, as well as other modifiers, such as a MagGrid, for more control over your light. Additionally, it is made from molded silicone rubber for a sleek, simple design with good durability and it comes with a microfiber carrying pouch.Increase the apparent size of your flash by about 300% with the MagBounce, part of the MagMod flash modifier system and intended for use with the MagMod MagGrip. The soft, diffused light produced by this attachment functions similarly to a softbox and cast the beam over a large area. Also, the MagBounce can be oriented in one of four different positions for use in both portrait and landscape shootings thanks to the attachment with four neodymium rare-earth magnets. With this system, the MagBounce can be used in combination with other accessories, such as the MagGel. It is made from molded silicone rubber for a sleek, simple design with good durability and comes with a microfiber carrying pouch.
Control light spill and narrow your flash’s beam angle to 40° with the MagGrid, designed for the MagMod flash modifier system. This grid efficiently focuses the light and attaches to the MagGrip via two neodymium rare-earth magnets. Also, it is stackable with other accessories and even other MagGrids, allowing users to further narrow their beam angle. It is made from molded silicone rubber for a sleek, simple design with good durability.
MagMod MagGel Holder
Mount and swap out gels on your flash quickly and easily with this MagGel Holder for the MagMod modifier system. The silicone rubber slot holds up to 3 MagMod gels and snaps on to the MagMod system via two neodymium rare-earth magnets. Also, it is stackable with additional holders and other MagMod accessories.

MagMod Creative Gel Set
Add some flair and creativity to your lighting with this Creative Gel Set designed for use with the MagMod flash modifier system. The kit includes red, orange, yellow, green, blue, teal, purple, and magenta gels made from a rigid polycarbonate for durability and easier handling. They easily slide into the MagMod gel slot for quick attachment and removal.

MagMod MagGrip
Made from an elastic silicone rubber, the MagGrip from MagMod stretches over the head of most on-camera flash units and provides two neodymium rare-earth magnets for quickly mounting a variety of accessories from the MagMod flash modifier system. The rubber offers a secure, tight grip on the flash head and is durable. Also, the flash head should be about 2.5″ wide for the modifiers to be able to properly attach to the flash head.

Compatible Flashes
This is not complete list, only few models are listed.
Canon: 380EX, 420EX, 430EX, 430EX II, 540EZ, 550EX, 580EX, 580EX II, 600EX-RT
Nikon: SB-24, SB-25, SB-26, SB-28(DX) SB-50DX, SB-80DX, SB-600, SB-700, SB-800, SB-900, SB-910
Sony: HVL-F60M, HVL-F58AM, HVL-F56AM
Olympus: FL-50R, FL-600R
Yongnuo: YN560, YN560-II, YN560-III, YN568EX-II, YN565EX
Neewer: TT560, NW680/TT680
Bolt: VX-710, VX-760, VS-510, VS-560
Bower: SFD680C, SFD728, SFD885, SFD926, SFD970
Pentax: AF540FGZ, AF540FGZ II, AF360FGZ
Sigma: EF-610
Metz: 44 AF-1, 52 AF-1, 52 AF-2, 58 AF-1, 58 AF-2
Vivitar: DF-286, DF-293, DF-383, DF-483, DF-583, 385HV
Phottix: Mitros, Mitros+
Nissin: i40, i60
Godox: AD200, TT350S, V850II, TT685S, V860II, TT660II, TT520II
This will also fit other similarly sized flash units